In the biotech- and pharmaceutical industry it is vital to have precise information
about the pH value of the bioprocess. The pH directly affects productivity, stability
and analysis of the active ingredients.
In a bioreactor / fermenter, the environmental conditions for cells or microorganisms should be optimal.
The AppliSens pH+ sensor is the ultimate pH sensor for bioprocess measurement.
The pH+ sensor has a fixed sleeve diaphragm. Compared to other diaphragm
types, the sleeve diaphragm gives increased measuring accuracy and precision, resulting in excellent performance: 

• No cross contamination
• Precise calibration
• Not sensitive to fouling
• No need to recalibrate
• Low and constant offset
• Stable signal over time

The sensor is constructed using FDA approved materials, like the non-toxic solid gel
electrolyte. Furthermore this sensor has an internal pressure, which reduces cross
contamination. The pH sensor is designed to withstand repeated sterilization cycles
without failure.
AppliSens sensors have a Long-Life code print (engraved serial number) on the
sensor head and are accompanied by a certificate (good for validation; FDA / GLP).

The electrode has a 12 mm body and a PG13.5 connector and fits into any standard
sensor holder.

Ordering information:

Standard pH+
Z001012051 pH+ sensor K9 connector, insertion length 120mm (TracFix and EasyFix)
Z001023551 pH+ sensor K9 connector, insertion length 235mm (Bioreactor 1-5 Ltr.)
Z001032551 pH+ sensor K9 connector, insertion length 325mm (Bioreactor 7 Ltr.)
Z001042551 pH+ sensor K9 connector, insertion length 425mm (Bioreactor 15 Ltr.)
Z001059051 pH+ sensor K9 connector, insertion length 590mm (Bioreactor 20 Ltr.)

Other lengths upon request

pH+ with S8 connector
Z001012061 pH+ sensor S8 connector, insertion length 120mm
Z001023561 pH+ sensor S8 connector, insertion length 235mm
Z001032561 pH+ sensor S8 connector, insertion length 325mm

AppliSens is a brand of Applikon Biotechnology